材質 | EPDM |
---|---|
產地 | 意大利 |
類型 | 橡膠制品 |
批號 | 3009 |
加印LOGO | 不可以 |
是否進口 | 是 |
貨源類別 | 現貨 |
品牌 | TGT |
加工定制 | 支持 |
Standards: EN ISO 6134/05 TYPE 2 class A (Ω). Application: steel cord hose for saturated steam at a maximum working pressure 18 bar (261psi), used in the chemical industry, petrochemical and industrial applications in general. Not recommended forsteam cleaner. The hose can be used for peaks of superheated steam at 230°C and at 18 bar. Attention: the use of superheated steam reduces the hose life. For longer life drain after use. Temperature: from -40°C (-40°F) to +210°C (+410°F). Construction Tube: black, smooth, EPDM rubber, resistant to saturated steam.Reinforcement: inserts of steel wire. Cover: black, pin pricked, smooth (wrapped fnish), EPDM rubber with excellent resistance to high temperatures, weathering, abrasion, and ageing. Also available upon request: 1.Different diameters 2.According to the standard BS 5342 | 質量標準: EN ISO 6134/05 2類 A 級( Ω) 應用范圍: 鋼絲加強層蒸氣管,用于輸送最大工作壓力為18bar(261psi)的飽和蒸汽。用于化工,石化以及一般工業應用。不建 議用于蒸汽清洗機。該管可在18 bar 工作壓力時短時間耐230°C 的超熱蒸汽。注意:用于超熱蒸汽后會縮短管子使用壽命。為延 長壽命請用后將管內的水排凈 溫度范圍: -40°C(-40°F)到 +210°C(+410°F) 軟管結構 內層: 黑色,光滑,EPDM 橡膠,耐飽和蒸汽 加強層: 鋼線加強層 外層: 黑色,光滑( 表面布紋),EPDM 橡膠,極好的耐高溫、耐 氣候和耐老化性,表面采用針孔技術,能防止管子內部脫層引起 爆裂 可選擇項: 1. 不同口徑 2. 符合BS 5342 標準 |
code (編碼) | inside diameter (內徑) | outside diameter (外徑) | working pressure (工作壓力) | burst pressure (爆破壓力) | weight nominal (重量) | length max (最大長度) | ||||||
mm | inch | mm | inch | bar | psi | bar | psi | kg/m | lbs/ft | m | ft | |
1186612 | 19 | 3/4 | 33 | 1,30 | 18 | 270 | 180 | 2700 | 0,78 | 0,52 | 120 | 400 |
1148133 | 25 | 1 | 39,5 | 1,56 | 18 | 270 | 180 | 2700 | 1,06 | 0,71 | 120 | 400 |
1228560 | 32 | 1-1/4 | 48 | 1,89 | 18 | 270 | 180 | 2700 | 1,39 | 0,94 | 120 | 400 |
1186299 | 38 | 1-1/2 | 54 | 2,13 | 18 | 270 | 180 | 2700 | 1,60 | 1,08 | 120 | 400 |
1187082 | 51 | 2 | 69 | 2,72 | 18 | 270 | 180 | 2700 | 2,58 | 1,73 | 120 | 400 |